Didactic Platform for Level and Temperature Control: Integration of the FX3U PLC with the Elipse E3 SCADA

Authors

  • GERONIMO BARBOSA ALEXANDRE Federal Institute of Paraiba https://orcid.org/0000-0002-0378-0108
  • João Victor da Silva Fernandes Federal Institute of Paraiba
  • Caio Henrique Vieira Alves Federal Institute of Paraiba

DOI:

https://doi.org/10.21708/issn27635325.v7n2.a15010.2025

Abstract

This paper aims at the development and implementation of a low-cost didactic platform for level and temperature control in a coupled tank system, applicable to common industrial processes in the petroleum, gas, and food sectors. The methodology encompasses the prototype assembly with the FX3U PLC, the design and validation of the on-off level control with timed heating, in addition to the construction of the supervision and operation system for the bench. The project's differential lies in its low cost, the local data supervision, and the replicability of the prototype by other educational institutions. The implemented on-off control strategy successfully managed the tank level, commanding the fill and empty pumps via sensors. The local monitoring system proved to be reliable and efficient in measurements, allowing for the real-time supervision of the process variables through the SCADA application, with a low latency rate (4 seconds), which is adequate when compared to the process dynamics that unfold over minutes. Three screens were developed: user registration, alarm generation, and the export of operational data in spreadsheet format for better process operation.

Author Biographies

  • GERONIMO BARBOSA ALEXANDRE, Federal Institute of Paraiba

    Graduação em Engenharia Elétrica (UFCG, 2013) e Mestrado em Engenharia de Automação e Controle (2016) pela Universidade Federal de Campina Grande. Trabalhou como engenheiro de proteção de sistemas elétricos (2013-2014), atuou como consultor e projetista de plantas de secagem do caulim com uso de energia solar e diesel (2014-2015). Alexandre é professor EBTT, nível B-4 do Instituto Federal de Paraiba Campus Cajazeiras (2021-Atualmente), suas áreas de interesse são: automação e controle de processos, diagnóstico de falhas em sensores e atuadores, modelagem e simulação de processos industriais, automação inteligente, informática industrial, redes elétricas inteligentes, sistemas embarcados, projetos elétricos e aplicações de fontes alternativas de energia.

  • João Victor da Silva Fernandes , Federal Institute of Paraiba

    Graduando em Engenharia de Controle e Automação pelo IFPB Campus Cajazeiras.

  • Caio Henrique Vieira Alves , Federal Institute of Paraiba

    Graduando em Engenharia de Controle e Automação pelo IFPB Campus Cajazeiras.

Published

2025-12-22

Issue

Section

Artigos